TSM 4 U

This module replaces the old Harley TSM turn signal module for carburetor models that had the ignition module with two 12-pin connectors (gray and black) installed between model years 1999 and 2003. It supports ignition enable; starter enable; and has an integrated automatic turn signal cancel function. A short press of a turn signal button (less than 0.5 seconds) for overtaking causes the corresponding turn signal to flash 4 times. A longer press (more than 0.5 seconds) causes the corresponding turn signal to flash 40 times. This auto-cancel function can be disabled by switching on the dip switch on the pcb; causing the turn signals to flash continuously. A hazard warning light function is also integrated and is activated by pressing both turn signal buttons simultaneously.The flasher frequency is - of course independent from load; no matter if led inserts or halogen bulbs are installed.Please note that the module is intended for cabureted bikes. It will not work in fuel injected bikes with serial data line.