Kraus, Raptor 1.5" (38mm) Pullback Plate. Black

The Raptor Pull Back Plate will fit Road Glides and Road Kings. Bolt it to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5" (3.8cm) to improve the ride. You will also allow you to mount any standard risers and they will clear the gauges on 14-Up Road Glides.- The Raptor Plate (body only) adds 2.5" (6.4cm) of total height to the bar/riser on 14-up baggers. - Total Height may vary slightly depending on the bushing and/or bar type.- Improves bar position when using Motocross style bars. - Kraus recommends running Kraus Isolated Risers with this setup for vibration damping.- The risers solid-mount to the stock or aftermarket triple trees and the risers solid-mount to the Raptor Plate.Note: Holes will need to be cut in the bagger Nacelle for the risers to protrude or use our 984604 Billet Gauge Mount and get rid of that stock plastic nacelle altogether. Note: The Raptor Plate Nacelle / Gauge Panel modification template is available online for download at motorcyclestorehouse.com.Note: Use the included Raptor Plate Drill Guide tool to get the pilot holes perfectly positioned in your Nacelle